PREMEO DESIGN 7/10

The Longlife system for fashion demands.

Premeo Design 7 and 10 Snap System

The Longlife snap fastener system for fashion demands.

Today snap fastener systems have to meet two requirements: optimal and safe functionality as well as attractive design. The PREMEO DESIGN series meets both requirements and sets fashionable design accents. The unique look of PREMEO DESIGN 7 + 10 scores particularly well in workwear, sports and leisurewear, denim clothing and leather goods.

The design interlocking system is based on FlexFix® technology, which guarantees an extremely high mechanical load-bearing capacity. Dimensional stability, durability and constant opening values characterise this product. Up to 50,000 opening and closing cycles* can be performed without significant wear of the functional parts. In addition, there are different opening forces for a convenient closure depending on the application.

1
2
3
4
1

Brass spherical cap

2

Optimum protection of the functional part by the metal spherical cap

3

Functional part made of chemically and thermally stable plastic

4

Metal spherical cap guarantees high compressive strength

At the same time PREMEO DESIGN 7 and 10 offer various design options for individual requirements. The eyelet, in which the coloured plastic inlays are particularly effective, is available in the rounded standard version or in the angular and clear design of the Moneta look. In addition, the flattened shape of the ball offers an ideal place for your exclusive logo. Numerous galvanic finishes also make every PREMEO DESIGN system a design highlight.

FUNCTION AND ADVANTAGES

The principle of a push-button system is defined by the functionality of the eyelet. PREMEO DESIGN is based on FlexFix® technology, in which a flexible high-tech plastic is integrated in the eyelet, which has spring elastic properties.

This combination of the metal spherical cap and plastic inlay is particularly stable and withstands high mechanical loads. When the ball is pressed into the eyelet (spring part), the flexible plastic inlay is widened so that the head of the ball snaps in comfortably and is perfectly enclosed. This closure can be opened just as easily.

SIZES AND SHAPES

Individual, attractive design and full functionality

The eyelet of the PREMEO DESIGN 7 and 10 is available in two versions. One in the angular and clear Moneta design, which corresponds to the shape of a „thick coin“, and the other in the rounded and elegant standard design.

PREMEO DESIGN 7 (ø 12 mm)

PREMEO DESIGN 7 Moneta (ø 12 mm)

PREMEO DESIGN 10 (ø 16,7 mm)

PREMEO DESIGN 10 Moneta (ø 16,7 mm)

Farbstrich orange

PREMEO DESIGN
BRINGS COLOUR INTO PLAY!

With the coloured plastic inlays, this version of the PREMEO series in particular offers undreamed-of possibilities for setting a special design accent. Whether in a trend colour or according to your CI, the different combinations of coloured plastic with galvanic surfaces allow exciting effects to be achieved. We will be happy to check your individual colour requirements.

DESIGN POSSIBILITIES

For PREMEO DESIGN there is a variety of design options available, which make it possible to give the system your individual design. The following graphic gives you an initial overview. Further information on the various caps and finishing options can be found in our separate brochures on caps and finishing or contact our field service directly.

1
2
3
4
5
6
7
8
9
10
1

Different shapes and sizes

2

Design and logo embossing

3

Finishing

4

Various galvanic surfaces

5

Plastic inlay in different colours

6

Logo embossed

7

Various galvanic surfaces

8

Various galvanic surfaces

9

Galvanic refinement

10

Spherical cap with logo

THE ADVANTAGES OVER THE S-SPRING SYSTEM

PREMEO DESIGN is clearly superior to conventional S-spring systems in terms of durability and functionality thanks to FlexFix® technology.

ADVANTAGES

  • Constant opening values
  • High comfort due to consistent quality
  • Long-term durability

PROCESSING INFORMATION

  • No pre-punching of the carrier material
  • Manual and semi-automatic
  • For thin materials, processing with washer

TYPICAL APPLICATIONS

  • Workwear and image clothing
  • Sports and leisurewear
  • Denim clothing
  • Leather clothing
  • Military clothing and equipment
  • Public services and authorities

DOWNLOAD PREMEO DESIGN 7/10 CATALOGUE

The PREMEO DESIGN 7/10 catalogue with further information is available for download. From technical information to application areas, the catalogue offers everything you need to know about the PREMEO DESIGN 7 and 10 push-button systems. The document is available in PDF format. If you encounter problems displaying the document in your browser, we recommend that you use Adobe Reader. Download under get.adobe.com/en/reader

REQUEST DOWNLOAD (PDF 1.9MB)

Premeo Design 7

Artikel
D (mm)
Action
Material
Info
Metal caps
SB1305BB
Durchmesser: 12,9 mm
 
Material: Brass
 
SB1505BB
Durchmesser: 15,1 mm
 
Material: Brass
 
Plastic caps
DK 306/13.76M
Durchmesser: 12,9 mm
 
Material: Polyamide, brass
 
DK 306/15.76M
Durchmesser: 15,1 mm
 
Material: Polyamide, brass
 
Blind caps
DSB 4.005
Durchmesser: 12,5 mm
 
Material: Brass
 
Eyelets
DPLO 7
Durchmesser: 12,0 mm
 
Material: Brass, plastic
 
DPLO 7M1
Durchmesser: 12,0 mm
 
Material: Brass, plastic
 
Ball
DSLK 7
Durchmesser: 8,1 mm
 
Material: Brass
 
Rivet
DSN 4.025
Durchmesser: 10,5 mm
 
Material: Brass
 
DSNC 4/11,5.001
Durchmesser: 11,5 mm
 
Material: Brass
 
Disk
VV 1714
Durchmesser: 12,5 mm
 
Material: Polyethylene
Info: for reinforcing thin fabrics

Premeo Design 10

Artikel
D (mm)
Action
Material
Info
Metal caps
SB1505BB
Durchmesser: 15,0 mm
 
Material: Brass
 
SB1705BB
Durchmesser: 16,8 mm
 
Material: Brass
 
Plastic caps
DK 306/15.76M
Durchmesser: 15,1 mm
 
Material: Polyamide, brass
 
SB1805BB
Durchmesser: 17,8 mm
 
Material: Polyamide, brass
 
Blind caps
DSB 4.005
Durchmesser: 12,5 mm
 
Material: Brass
 
DSLB10
Durchmesser: 15,0 mm
 
Material: Brass
 
Eyelets
DPLO 10
Durchmesser: 16,7 mm
 
Material: Brass, plastic
 
DPLO10M1
Durchmesser: 16,7 mm
 
Material: Brass, plastic
 
Ball
DSLK 10
Durchmesser: 11,9 mm
 
Material: Brass
 
Rivet
DSN 4.025
Durchmesser: 10,5 mm
 
Material: Brass
 
DSNC 4/11,5.001
Durchmesser: 11,5 mm
 
Material: Brass
 
Disk
VV 1714
Durchmesser: 12,5 mm
 
Material: Polyethylene
Info: for reinforcing thin fabrics